home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
BBS Toolkit
/
BBS Toolkit.iso
/
doors_1
/
dice221.zip
/
LOCK&IRQ.DOC
< prev
next >
Wrap
Text File
|
1992-10-31
|
2KB
|
56 lines
If you are running a locked port and/or non-standard IRQ's, you
can tell this door to open the port at the locked speed and the
non-standard IRQ by creating a small text file.
Name the text file PORTx.SYS -- where 'x' is the locked-port or
non-standard IRQ port number.
For example, if port 1 is locked at 19200, create the file PORT1.SYS.
If Port 3 is setup on IRQ 7, create the file PORT3.SYS.
PORTx.SYS contains three lines. The first contains the locked-port
speed. If the port is not a locked port, place a 0 (ZERO) on this
line. The second line contains the IRQ. If you are using the standard
or default IRQ, simply put a 0 (ZERO) on this line. The third line is
not used, put your name or a little comment if you'd like.
Example:
I am running com-port 3 on IRQ 7 locked at 19200. I create a file
called PORT3.SYS which looks like this:
-----------------------------
19200
7
this line is not used...
-----------------------------
If this port were on IRQ 7 but not locked then the file would
look like this:
-----------------------------
0
7
this line is not used...
-----------------------------
And finally, if the port were locked at 19200, but used the
standard IRQ, the file would look like this:
-----------------------------
19200
0
this line is not used...
-----------------------------
One last thing: PORTx.SYS ***MUST*** be in the same directory as the
door program and its datafiles!
That is all, thanks for your support!
Jeff Freeman